Page 1 of 1
T350 speedo pinion
Posted: Wed Oct 07, 2020 9:31 pm
by alanr
20201008_162321_copy_600x1067_1.jpg
Does anybody know how to remove this pinion.speedo is erratic. Not the cable or speedo.spinning the wheel the pinion stops and starts while wheel is turning.or if someone has any ideas why it's doing this.thanks
Re: T350 speedo pinion
Posted: Wed Oct 07, 2020 11:58 pm
by GTandcbr
The erratic speedo will be almost certainly be caused by a worn pinion gear(see photo) usually as a result of no grease.
On my 550 the pinion was held in by a nylon retainer(see other photo) i made a tool to remove it having a slot in the middle gap to go over the pinion.