Page 1 of 1
Gt 250 regulator output.
Posted: Mon Oct 05, 2020 7:32 am
by Tapnell
Hi Guys, I’ve just fitted a modern Reg/rec to my 1973 250 to replace the silicon diode rectifier. Voltage measured at the battery rises from 12.5V to a max of 14.6 at high revs. My question is, will a modern sealed AGM battery be ok to use with that voltage input?
Thanks
Re: Gt 250 regulator output.
Posted: Mon Oct 05, 2020 8:39 am
by GTandcbr
You are fine to use that battery its the lithium battery you have to avoid, because they are charged at a set rate and can catch fire if overcharged

Re: Gt 250 regulator output.
Posted: Sat Oct 10, 2020 9:41 am
by Tapnell
GTandcbr wrote:You are fine to use that battery its the lithium battery you have to avoid, because they are charged at a set rate and can catch fire if overcharged

Many thanks for the advice
