How far can the cylinders for the T500 be bored? If the cylinders are currently 71mm how many bores are left before they need to be re-sleeved? This is a street bike.
Thanks in Advance.
Ray
Boring out 1974 Suzuki Titan T500L
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
rdtaylr
- Still in the Driveway
- Posts: 1
- Joined: Sat May 09, 2020 10:30 am
- Country: USA
- Suzuki 2-Strokes: 75 GT250
-
Zunspec4
- Expert racer
- Posts: 1087
- Joined: Tue Dec 16, 2008 11:37 am
- Country: UK
- Suzuki 2-Strokes: T500R, SV1000S, TS125, Seeley T500
- Location: Trowbridge UK
Re: Boring out 1974 Suzuki Titan T500L
Hi Ray,
T/GT500 barrels can be re-bored to 72mm, but only aftermarket forged pistons from Wiseco/Wossner are available to this size. Other pistons are available up to 71.5mm.
Re-sleeving barrels is possible, but not a straightforward operation.
Cheers Geoff
T/GT500 barrels can be re-bored to 72mm, but only aftermarket forged pistons from Wiseco/Wossner are available to this size. Other pistons are available up to 71.5mm.
Re-sleeving barrels is possible, but not a straightforward operation.
Cheers Geoff
