Suzuki 2 Strokes

Posted: **Mon Aug 05, 2019 9:26 pm**

I need to pull the flywheel off, sending crank to Peter for rebuild.What size bolt do i need to push flywheel off. It looks like 14mm x 1.5. Anyone have this info handy? t500

Posted: **Tue Aug 06, 2019 4:50 am**

The rear axle works on some of the twins. Have not tried it on a T500, but it probably works.

Posted: **Wed Aug 07, 2019 4:41 am**

I did a little measuring & looking. The flywheel is M16 x 1.5. KD tools sells a hardened pusher bolt. Its been ordered.

Suzuki 2 Strokes

Pulling flywheel

Pulling flywheel

Re: Pulling flywheel

Re: Pulling flywheel