And next problem... After i did get bike running i noticed that clutch wont disengage.
I have tried to adjust clutch but i still cant rotate rear wheel with my hand when clutch lever is pressed? What could be the problem?
And offcourse when bike is running on stand and you put 1 gear rear wheel starts spinning...
Suzuki gt 250 clutch wont disengage
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the street
- Posts: 29
- Joined: Mon Jun 11, 2018 11:11 am
- Country: finland
- Suzuki 2-Strokes: suzuki gt250
- dorT500
- To the on ramp
- Posts: 253
- Joined: Mon Jun 12, 2017 12:01 pm
- Country: USA
- Suzuki 2-Strokes: '75 T500M since '93 Ridden it over 100,000 mi
- Location: Galveston County, Tx.
Re: Suzuki gt 250 clutch wont disengage
That is normal to a degree, harder to turn than if the gearbox was in neutral.... hard to tell from here but it is definitely not going to just spin easily.cleaf wrote:.......I have tried to adjust clutch but i still cant rotate rear wheel with my hand when clutch lever is pressed?......
_____________
______________________
_______________________________
GONE.......WITH A PUFF OF SMOKE AND A BLUR OF SPOKE
______________________
_______________________________
GONE.......WITH A PUFF OF SMOKE AND A BLUR OF SPOKE
-
- Expert racer
- Posts: 1306
- Joined: Wed Oct 13, 2010 2:55 pm
- Country: England
- Suzuki 2-Strokes: TS100, T200, GT250, T500, GT500, GT550, GT750, GS750
- Location: Southeast England
- Contact:
Re: Suzuki gt 250 clutch wont disengage
Has the bike been unused for a while? The plates could be stuck together.
Keeping old 2 strokes alive !