Banshee Coils

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
Doss1961
On the street
Posts: 47
Joined: Mon Dec 11, 2017 3:19 pm
Country: United Kingdom
Suzuki 2-Strokes: T250 Hustler

Banshee Coils

Post by Doss1961 »

Hello

I am going to fit a pair of Banshee coils to my 250R Hustler and the coils only have one spade connector on each coil but I have four wires 2 Orange 1 Black & 1 White could any members advise on the correct wiring procedure.

Thanks in Advance

Paul
dollydog
Yeah Man, the Interstate
Posts: 630
Joined: Fri Aug 11, 2017 7:09 am
Country: england
Suzuki 2-Strokes: several gt250 ramairs

Re: Banshee Coils

Post by dollydog »

think you'll find the banshee runs cdi ignition and there's no 12v feed to them [orange wires are the live feeds, black goes to one coil, white wire goes to the other]. the kill switch on a cdi system earths the coils to kill the engine, obviously the normal ignition kill switch breaks the 12v live feed to cut the motor. by the time you've figured out the wiring [swapping live for earth etc] you could have finished the bike and done 1000 miles on it :D don't bother is my advice :D more trouble than it's worth.
cheers, dd.
GTS250 road registered. TS250 engine, Ramair frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.
Post Reply