75 GT500: How to repair/restore front brake system?

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
GT500-2stroke
Around the block
Posts: 80
Joined: Wed Aug 22, 2018 10:55 pm
Country: USA
Suzuki 2-Strokes: GT100, GT500

75 GT500: How to repair/restore front brake system?

Post by GT500-2stroke »

1975 GT500:

How to repair or restore front brake system?

My goal is to make the brake system work properly and reasonably clean.
( It does not have to be perfect looking, at least for now)

Bike came with extra brake system ( partial ), which includes broken master cylinder and
the pipe/cable.

In addition, the is brake system on the bike which is not working.

I need to decide which one to work on?
How to decide which one to work on?
( Attached some pics below)

Once that is decided, I need to know:

1. Where do I start?
2. Which parts of brake system to replace?
3. How should I proceed in terms of what tasks are to be performed?

Appreciate all/any help.
You do not have the required permissions to view the files attached to this post.
GT500-2stroke
Around the block
Posts: 80
Joined: Wed Aug 22, 2018 10:55 pm
Country: USA
Suzuki 2-Strokes: GT100, GT500

Re: 75 GT500: How to repair/restore front brake system?

Post by GT500-2stroke »

More pics..
You do not have the required permissions to view the files attached to this post.
Craig380
Expert racer
Posts: 1250
Joined: Mon Dec 01, 2008 2:52 am
Location: Manchester, UK

Re: 75 GT500: How to repair/restore front brake system?

Post by Craig380 »

You can easily restore the caliper - the seals and pistons are still available from Suzuki for rebuilds.

For the master cylinder, I wouldn't bother trying to restore what you have. It's fiddly and the working bore of the m/c is probably screwed with corrosion.

Just buy a used Suzi m/c from eBay. On my GT380 (same brake set up as the GT500) I fitted a good used m/c from a Suzi RF600 (Suzi used the same type on loads of different bikes, from the Bandit to the GS500 etc etc). The black all-metal m/c body looked fine on the bike and the larger internal piston made the brake much more effective.
1976 GT380 - wounded by me, and sold on
2006 SV650S - killed by a patch of diesel and a kerb in Feb 2019
2017 SV650 AL7 - naked and unashamed
GT500-2stroke
Around the block
Posts: 80
Joined: Wed Aug 22, 2018 10:55 pm
Country: USA
Suzuki 2-Strokes: GT100, GT500

Re: 75 GT500: How to repair/restore front brake system?

Post by GT500-2stroke »

Craig380 wrote:You can easily restore the caliper - the seals and pistons are still available from Suzuki for rebuilds.

For the master cylinder, I wouldn't bother trying to restore what you have. It's fiddly and the working bore of the m/c is probably screwed with corrosion.

Just buy a used Suzi m/c from eBay. On my GT380 (same brake set up as the GT500) I fitted a good used m/c from a Suzi RF600 (Suzi used the same type on loads of different bikes, from the Bandit to the GS500 etc etc). The black all-metal m/c body looked fine on the bike and the larger internal piston made the brake much more effective.
Great!

Will work along these lines..Thanks a lot for your input!

Appreciate it.

What about the brake line?
Will it need a good cleaning from inside/outside?
I would think it will be good idea to clean it inside, correct?

How do I clean it from inside?
What cleaner should I be using?
Can I just use any parts cleaner like WD40?
GT500-2stroke
Around the block
Posts: 80
Joined: Wed Aug 22, 2018 10:55 pm
Country: USA
Suzuki 2-Strokes: GT100, GT500

Re: 75 GT500: How to repair/restore front brake system?

Post by GT500-2stroke »

Craig380 wrote:You can easily restore the caliper - the seals and pistons are still available from Suzuki for rebuilds.

For the master cylinder, I wouldn't bother trying to restore what you have. It's fiddly and the working bore of the m/c is probably screwed with corrosion.

Just buy a used Suzi m/c from eBay. On my GT380 (same brake set up as the GT500) I fitted a good used m/c from a Suzi RF600 (Suzi used the same type on loads of different bikes, from the Bandit to the GS500 etc etc). The black all-metal m/c body looked fine on the bike and the larger internal piston made the brake much more effective.
Could not find a used m/c on ebay.
Found a new m/c on eBay.

https://www.ebay.com/itm/Suzuki-GS500-G ... 4085!US!-1" onclick="window.open(this.href);return false;

Will this need modification to brake line ?
( Not that mind any modification if needed, just want to make sure that it is doable with relatively ease )

Will this be a good choice?

Thanks.
Craig380
Expert racer
Posts: 1250
Joined: Mon Dec 01, 2008 2:52 am
Location: Manchester, UK

Re: 75 GT500: How to repair/restore front brake system?

Post by Craig380 »

I can't say if that m/c is a good choice or not, as it is a pattern part and not genuine Suzi, but it's not expensive.

I would definitely not re-use the old brake line: simply purchase a new stainless steel braided hose with banjo fittings at both ends from a bike shop, and fit it using new copper washers. The best stuff for cleaning up the caliper bore and seal grooves etc is proper brake cleaner, which leaves no residue. It's dirt cheap.

Clean out the seal groove really carefully as it will no doubt be full of white furry corrosion. A Dremel with a soft wire brush is ideal.
1976 GT380 - wounded by me, and sold on
2006 SV650S - killed by a patch of diesel and a kerb in Feb 2019
2017 SV650 AL7 - naked and unashamed
User avatar
dorT500
To the on ramp
Posts: 253
Joined: Mon Jun 12, 2017 12:01 pm
Country: USA
Suzuki 2-Strokes: '75 T500M since '93 Ridden it over 100,000 mi
Location: Galveston County, Tx.

Re: 75 GT500: How to repair/restore front brake system?

Post by dorT500 »

GT500-2stroke wrote:.......What about the brake line?
Will it need a good cleaning from inside/outside?
I would think it will be good idea to clean it inside, correct?
How do I clean it from inside?
What cleaner should I be using?
Can I just use any parts cleaner like WD40?
God forbid, you might kill a pedestrian, yourself and/or a passenger with thinking like that. That brake line may be 40+ years old.

From your pic, it looks like it may have already been leaking at one time.

Go with the the upgrade of a new stainless steel braided line as suggested.
_____________
______________________
_______________________________
GONE.......WITH A PUFF OF SMOKE AND A BLUR OF SPOKE
User avatar
johnakay
I likes them jubblies
Posts: 2365
Joined: Wed Oct 15, 2008 11:19 am
Country: UK
Suzuki 2-Strokes: bike

Re: 75 GT500: How to repair/restore front brake system?

Post by johnakay »

I remember someone years ago fitted a brembo caliper off an MZ motorcycle.
and they claimed it work a hell of a lot better.
I did own an MZ and I can tell you these do work brilliantly.

Image
If I wanted to make a life-long career out of
working with the mentally retarded I would
have opened a Harley Davidson Dealership
sportston
Expert racer
Posts: 1118
Joined: Wed Jul 10, 2013 12:04 pm
Country: England, UK
Suzuki 2-Strokes: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S

Re: 75 GT500: How to repair/restore front brake system?

Post by sportston »

Craig380 wrote: I would definitely not re-use the old brake line: simply purchase a new stainless steel braided hose with banjo fittings at both ends from a bike shop, and fit it using new copper washers.
+1 on that. Stainless braided hoses aren't too expensive and can make a huge difference. They will usually fit a majority of master cylinders, so should be fine with your new later model m/c.
I also agree that a modern replacement caliper would also be a worthwhile addition. I got one off an old GS750 to fit my GT380, but with a Salty-monk adaptor you could fit something much better and more modern if you can afford it.
User avatar
jabcb
Moto GP
Posts: 4237
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: 75 GT500: How to repair/restore front brake system?

Post by jabcb »

The salty-monk upgrade requires a slightly larger brake disk.
For the GT250/GT380 you need to use a disk that’s for a GT500/GT550/GT750. On our GT250 cafe build we used an EBC VMD disk that they sell for the GT750.

For a GT500/GT550/GT750 you need to use a disk that’s larger than any that Suzuki used. On our T500 cafe build we are using an EBC disk that they sell for an obscure Honda — we haven’t gotten very far on this project so the results are TBD.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
GT500-2stroke
Around the block
Posts: 80
Joined: Wed Aug 22, 2018 10:55 pm
Country: USA
Suzuki 2-Strokes: GT100, GT500

Re: 75 GT500: How to repair/restore front brake system?

Post by GT500-2stroke »

Craig380 wrote:I can't say if that m/c is a good choice or not, as it is a pattern part and not genuine Suzi, but it's not expensive.

I would definitely not re-use the old brake line: simply purchase a new stainless steel braided hose with banjo fittings at both ends from a bike shop, and fit it using new copper washers. The best stuff for cleaning up the caliper bore and seal grooves etc is proper brake cleaner, which leaves no residue. It's dirt cheap.

Clean out the seal groove really carefully as it will no doubt be full of white furry corrosion. A Dremel with a soft wire brush is ideal.
Before I purchase, just want to make sure.

Found one on eBay. This should work for me, right?
Where do I get copper washers from?
You mean any bike/hardware store?

Could you please have a look at this and confirm.

https://www.ebay.com/itm/60cm-90cm-120c ... 0005.m1851" onclick="window.open(this.href);return false;
Craig380
Expert racer
Posts: 1250
Joined: Mon Dec 01, 2008 2:52 am
Location: Manchester, UK

Re: 75 GT500: How to repair/restore front brake system?

Post by Craig380 »

That's the right type of line, make sure the fittings (banjo and securing nut) are stainless steel too. On cheap hoses they can be alloy, which is not strong enough for brake systems. Any bike shop should sell packs of the copper washers.
1976 GT380 - wounded by me, and sold on
2006 SV650S - killed by a patch of diesel and a kerb in Feb 2019
2017 SV650 AL7 - naked and unashamed
Post Reply