Page 1 of 1
How do I remove the ignition key cylinder from the gauge?
Posted: Thu Aug 09, 2018 9:49 am
by pgb123
As you can see, there’s a rubber boot on the back. I don’t want to damage anything. Can’t seem to find the answer by search.
Thanks in advance.
Re: How do I remove the ignition key cylinder from the gauge
Posted: Thu Aug 09, 2018 11:05 am
by sportston
1. Remove key from lock.
2. Unscrew ring beneath key using rubber ended pliers
3. Lock falls out of gauge casing.
Re: How do I remove the ignition key cylinder from the gauge
Posted: Thu Aug 09, 2018 11:20 am
by dorT500
Re: How do I remove the ignition key cylinder from the gauge
Posted: Thu Aug 09, 2018 1:04 pm
by pgb123
Oh. Thanks.
