Air Filter options. GT 250A

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
daxman
To the on ramp
Posts: 348
Joined: Thu Nov 07, 2013 1:59 pm
Country: United Kingdom
Suzuki 2-Strokes: A100 GT250 & 4t Yams!
Location: Brussel County, England

Air Filter options. GT 250A

Post by daxman »

1) New intake to filter box rubber - approx 40 quid delivered
2)2 x Foam pod filters - 25 quid
3) Wintergreen wash of old rubber and some self-amalgamating tape
to help things along - I've got these things..

Thoughts?

Cheers

James
sportston
Expert racer
Posts: 1119
Joined: Wed Jul 10, 2013 12:04 pm
Country: England, UK
Suzuki 2-Strokes: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S

Re: Air Filter options. GT 250A

Post by sportston »

Option 1.All day long!
Option 2 will be a pain in the bum to set up the carbs and you will lose some power on top end
Option 3 won't last. I've tried similar on my car and after a few weeks the tape splits.
daxman
To the on ramp
Posts: 348
Joined: Thu Nov 07, 2013 1:59 pm
Country: United Kingdom
Suzuki 2-Strokes: A100 GT250 & 4t Yams!
Location: Brussel County, England

Re: Air Filter options. GT 250A

Post by daxman »

Thanks - I know that pods are a poor option on CV carbs but wondered if they worked better with slides, if not then Option 1 it is.. (as always the list gets longer!)
Craig380
Expert racer
Posts: 1250
Joined: Mon Dec 01, 2008 2:52 am
Location: Manchester, UK

Re: Air Filter options. GT 250A

Post by Craig380 »

My 10p worth - try and stick with the factory airbox, it will save you a lot of time in fiddling with jetting.
1976 GT380 - wounded by me, and sold on
2006 SV650S - killed by a patch of diesel and a kerb in Feb 2019
2017 SV650 AL7 - naked and unashamed
sportston
Expert racer
Posts: 1119
Joined: Wed Jul 10, 2013 12:04 pm
Country: England, UK
Suzuki 2-Strokes: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S

Re: Air Filter options. GT 250A

Post by sportston »

daxman wrote:Thanks - I know that pods are a poor option on CV carbs but wondered if they worked better with slides, if not then Option 1 it is.. (as always the list gets longer!)
No matter what type of carbs you have, pod filters will need different jetting. Your best bet is nearly always to use the stock airbox. The larger airbox will smooth out the induction pulses enough to make a noticeable difference to engine performance. If you look at top-level modern race bikes they nearly all have large, or larger than normal, airboxes. Power delivery will be smoother and you will have a broader torque band.
Pod filters will help increase mid-range, but you lose some power at the bottom and the top ends of the range.
Indy650
Around the block
Posts: 84
Joined: Tue Jul 03, 2018 4:32 pm
Country: Usa
Suzuki 2-Strokes: '74 GT250

Re: Air Filter options. GT 250A

Post by Indy650 »

The stock box with the carbs vented to the box is the best option IMO. Pod filters can work good though. Stay away from the short K&N style filters though they rob power. You do have to adjust your carbs with pod filters but to me thats not really a downside it only takes a half hour or so on a nice day. Of course riding in the rain can be problematic with pods unless you use outerwears and filter oil spray.
Post Reply