Hi folks,
Is this the correct baffle for a T350 exhaust?
It was lodged in the pipe, but was lodged inside further than normal. I had to use some long reach needle nose pliers to extract it from the muffler. The other muffler has no baffle at all.
Can anyone show a pic of the correct baffle, or confirm if this one is the correct one? I've tried google, but haven't come up with a definitive answer.
Cheers!
Marc
Pic of a baffle for T350
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- Luxmatic
- Still in the Driveway
- Posts: 9
- Joined: Wed Jun 20, 2018 8:34 pm
- Country: Canada
- Suzuki 2-Strokes: T350 Rebel
- Location: Vancouver
Pic of a baffle for T350
You do not have the required permissions to view the files attached to this post.
- Marc
- Luxmatic
- Still in the Driveway
- Posts: 9
- Joined: Wed Jun 20, 2018 8:34 pm
- Country: Canada
- Suzuki 2-Strokes: T350 Rebel
- Location: Vancouver
Re: Pic of a baffle for T350
Answering my own question - yes this was a T350 baffle, but someone cut it down. I can see where it was shortened when comparing to a stock example.
Today I was also very fortunate to obtain locally one each NOS T350 and T250 baffles (unfortunately he didn't have any pairs). He said that the T250 baffle will work fine inside the T350 muffler (the diameter matches, but it's a slightly different design and slightly longer).
Anyone disagree with this?
Today I was also very fortunate to obtain locally one each NOS T350 and T250 baffles (unfortunately he didn't have any pairs). He said that the T250 baffle will work fine inside the T350 muffler (the diameter matches, but it's a slightly different design and slightly longer).
Anyone disagree with this?
You do not have the required permissions to view the files attached to this post.
- Marc