Morning all..
Don't old bikes wear out the most innocuous parts????
The little device that locks the choke in the on position on a 76 GT750.
It holds while not running but kicks off with the vibes from the engine.... any one got a part number or one knocking round without the wear groove?
Cheers Terry
Choke locking device
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the street
- Posts: 29
- Joined: Tue Mar 24, 2015 3:38 am
- Country: uk
- Suzuki 2-Strokes: sv650 sv1000 gs650 ts250 gt185 gt250 gsx250
Choke locking device
Gold 1974 GT250 regularly ridden like it should be. Blue 1976 GT750 under restoration/rebuild ready for abuse. Now registered and on the road !!
-
- Yeah Man, the Interstate
- Posts: 686
- Joined: Mon Nov 24, 2008 12:22 pm
- Location: Alexandria, La.
- Contact:
Re: Choke locking device
You might be able to build it back up with some JB weld. I used the stuff to piece back together a twin cylinder riding mower engine that had thrown a rod. Had a machine shop fit undersize rods, got all of chunks of engine case JB'd back in place, ran like a top and no oil leaks. Owner had not checked oil level, that was why it threw a rod.
-
- AMA Superbike
- Posts: 1769
- Joined: Tue Oct 14, 2008 6:47 pm
- Location: Blythewood, SC, USA
Re: Choke locking device
Mine does that too. I have three 34 mikunis with T500 choke levers attached to each other, so I have too much choke spring.
Lane
Lane
If you stroke it more than twice; you're playing with it.
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........