Dowels for gears and kick start shaft

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
Doss1961
On the street
Posts: 47
Joined: Mon Dec 11, 2017 3:19 pm
Country: United Kingdom
Suzuki 2-Strokes: T250 Hustler

Dowels for gears and kick start shaft

Post by Doss1961 »

Hello

I have lost 3 small 4mm (thick) dowels from the gear shaft bearings and kick start shaft I was going to buy some mild steel round bar and make some replacement ones,

Any ideas they must have got lost when getting the casings vapour blasted

Paul
User avatar
jabcb
Moto GP
Posts: 4240
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: Dowels for gears and kick start shaft

Post by jabcb »

Per the US online parts diagrams for the T250J, the transmission & kick starter dowel pins are still available.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Post Reply