GT750 clutch

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
User avatar
garry55
Yeah Man, the Interstate
Posts: 629
Joined: Wed Jan 01, 2014 2:04 pm
Country: UK
Suzuki 2-Strokes: GT750 hybrids (x2) RGV500

GT750 clutch

Post by garry55 »

can somebody provide me with the stroke measurement of the GT750 clutch lifting arm - ie - how far does it travel to fully disengage the clutch?
I don't have a working bike or GT750 motor in a frame that I can hook a clutch cable to so as to measure it myself.

Thanks in anticipation. :up:
Garry


I'm addicted to brake fluid, but I know I can stop anytime.
User avatar
tz375
Moto GP
Posts: 6204
Joined: Mon Nov 03, 2008 10:47 am
Location: Illinois

Re: GT750 clutch

Post by tz375 »

Well that was not so easy to measure. I popped the side cover off the Dunstall and tried to measure the lift on the pull rod and as best I could measure it it was 1.75mm, so you need say 2-3mm clearance between the pressure plate and that new side cover to be safe.
User avatar
garry55
Yeah Man, the Interstate
Posts: 629
Joined: Wed Jan 01, 2014 2:04 pm
Country: UK
Suzuki 2-Strokes: GT750 hybrids (x2) RGV500

Re: GT750 clutch

Post by garry55 »

many thanks for the effort, Richard :up: :up:
Garry


I'm addicted to brake fluid, but I know I can stop anytime.
Post Reply