GT550 SRIS Oil Lines Correct Connection Squence
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
Syd
- To the on ramp
- Posts: 215
- Joined: Tue Aug 02, 2011 8:25 pm
- Country: New Zealand
- Suzuki 2-Strokes: 72 T500J, 72 Kaw H1-B, 71 CB750 K1, 67 A7SS
GT550 SRIS Oil Lines Correct Connection Squence
Hello, I am just about to connect the 3 x small oil lines from the bottom of the crank case to each the 3 x cylinders and I just want to double check if the attached diagram from the GT550 service manual is based on looking at the front of the bike ie; the RH side would be correct when looking at the front of the bike as shown on the drawing Fig 7-4-1? I assume it is important to ensure the 3 x oil lines are connected in the correct sequence. Can anyone confirm that is correct before I proceed further? Thanks
You do not have the required permissions to view the files attached to this post.
-
Clifford
- On the street
- Posts: 25
- Joined: Sun Jun 10, 2012 6:03 pm
- Country: Canada
- Suzuki 2-Strokes: Original owner GT550L
Re: GT550 SRIS Oil Lines Correct Connection Squence
Not from the front! The left cylinder is on your left side when you're sitting on the bike!!
-
Syd
- To the on ramp
- Posts: 215
- Joined: Tue Aug 02, 2011 8:25 pm
- Country: New Zealand
- Suzuki 2-Strokes: 72 T500J, 72 Kaw H1-B, 71 CB750 K1, 67 A7SS
Re: GT550 SRIS Oil Lines Correct Connection Squence
Great, thanks for that. I did wonder the same thing myself, cheers
