Page 1 of 1
GT550 Carb Kit
Posted: Fri Apr 01, 2016 5:31 am
by hutchie63
Where in the UK can i purchase a carb rebuild kit for my GT550.loads on ebay but all from taiwan etc
Re: GT550 Carb Kit
Posted: Fri Apr 01, 2016 8:09 am
by Alan H
CMSNL or Robinson's Foundry/
Or even AW Motorcycles, Doncaster.
Or try your local Suzuki dealer - you just never know.
Where are you based?
Re: GT550 Carb Kit
Posted: Fri Apr 01, 2016 7:13 pm
by Vintageman
I would only use OEM parts. The is no good kit. The difficult items will be needle jet and jet needle. But change only if you need to.
You have to look into needle jet the first few mm to see if that precise metering area is OK. Mainly the issue is it is corroded and pitted in there and if even a little bike will run poor on that circuit. I think on the M its a 172 series? I think that is obsolete, but be sure . If you get this far and they are rough reply back for options.
Re: GT550 Carb Kit
Posted: Thu Apr 14, 2016 2:05 pm
by hutchie63
Alan H wrote:CMSNL or Robinson's Foundry/
Or even AW Motorcycles, Doncaster.
Or try your local Suzuki dealer - you just never know.
Where are you based?
Hi Im located in Hampshire UK