Suzuki 2 Strokes

Confused again. One side has a deep cutaway and one side is nearly flat. Which side faces in? Hard to tell from the fiche. I'm talkin about the seal in the clutch cover.

I looked at my Clymer manual. It looks like the cut away side faces in, but I'd like some confirmation before I install it.

Found a picture online for you!
http://www.mylivingneeds.com/saleitems/ ... rseal2.jpg" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
The larger/heavier lip always goes toward the oil or pressure side.

Thanks! Now that I put it in, I remember that's how it was.

Hi any seal,flat side facing you
Cheers,
Roger