GT 380 - No spark on left sylinder

[karl pa]

and i got 12v+ on all coils.

The power goes to the coil first, then to the points or electronic ignition. Do you have 12 volts on the wires that went on the points? If these wires have problems, your coils won't work.
I think they are black-black/yellow-white. If these wires are unhooked you should have 12 volts on each of them.

[Nissern]

I do also have 12v on the wiers comming from the ignition plate.
Im gone just sit back and wait a answer from Uwe (accent)

Ty for good replays guys =)

[Nissern]

Sent the ignition back to Accent, and it was somthing wrong with the plate.
It did miss or had broken resistor, and that why it didnt fire on left cylinder.
Realy hope this fix my problem, fingers crossed.