the oil pump actuating arm on my T500 wont fully return.
what is holding it in place.
it had new seals put in etc but the pump arm stick just about half way.
open throttle no problem but shut off it will only return so far.
I know I've repeated it a couple times but just in case you dont understand the 1st line.
check on google plenty of info but not on how to take the pump arm out.
T500 oil pump
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
johnakay
- I likes them jubblies
- Posts: 2365
- Joined: Wed Oct 15, 2008 11:19 am
- Country: UK
- Suzuki 2-Strokes: bike
T500 oil pump
If I wanted to make a life-long career out of
working with the mentally retarded I would
have opened a Harley Davidson Dealership
working with the mentally retarded I would
have opened a Harley Davidson Dealership
-
quocle603
- On the street
- Posts: 13
- Joined: Sun Mar 22, 2020 1:05 pm
- Country: United States
- Suzuki 2-Strokes: 1971 t500
Re: T500 oil pump
I had a similar issue with my oil pump as well. I just took off the lever and cleaned it really well and lubed it. The PO had put a spring to pull it back but I did not like that look at all, so I eliminated it. Good luck.
