What's better; tapered roller bearings or the old style ball bearings? In my case it's for my 1972 Suzuki GT750. But I've also aquired a '75 T500 that has a 'detent' when the handlebars are pointed straight ahead.
Do roller bearings give tighter handling? Last longer? (slightly differing dimensions notwithstanding!)
What have fellows found?
Olaf
Steering Head tapered roller bearings vs ball bearings?
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- Olafskii
- On the street
- Posts: 38
- Joined: Sun Dec 18, 2016 6:15 pm
- Country: Canada
- Suzuki 2-Strokes: 72 GT750, 74 GT750, 75 T500, 76T500, 09 DR650
- Location: Northern British Columbia
-
- On the main road
- Posts: 113
- Joined: Sun Aug 16, 2015 8:18 am
- Country: UK
- Suzuki 2-Strokes: GT750M TS125 TS100 GT750B
- Location: East Angular, UK
Re: Steering Head tapered roller bearings vs ball bearings?
Wherever possible, I always prefer to use TRBs. Everyone will say they improve the "feel" but I suspect that a lot of people fit them to bikes where the existing roller bearings are past their best...so they would feel better! I think if you had one bike with new roller bearings and one with TRBs, both set up correctly, you may struggle to notice any difference in ride quality but I find that TRBs wear better and are easier to adjust and require adjustment less regularly.
-
- Yeah Man, the Interstate
- Posts: 590
- Joined: Tue Mar 10, 2015 12:35 pm
- Country: WALES
- Suzuki 2-Strokes: suzuki gt 550j
- Location: Wales
Re: Steering Head tapered roller bearings vs ball bearings?
Never done it myself but I have heard you have to remove some material from the headstock to get the tapered bearings to fit.
98 carb Blackbird and GT550j
- johnakay
- I likes them jubblies
- Posts: 2365
- Joined: Wed Oct 15, 2008 11:19 am
- Country: UK
- Suzuki 2-Strokes: bike
Re: Steering Head tapered roller bearings vs ball bearings?
yes you have to trim the tubes to make them fit.
bb's are just as good but don't forget dont load all the bearings in to fill up the space.
leave one out thats how Suzuki did it in the 70's.
bb's are just as good but don't forget dont load all the bearings in to fill up the space.
leave one out thats how Suzuki did it in the 70's.
If I wanted to make a life-long career out of
working with the mentally retarded I would
have opened a Harley Davidson Dealership
working with the mentally retarded I would
have opened a Harley Davidson Dealership
-
- Expert racer
- Posts: 1087
- Joined: Tue Dec 16, 2008 11:37 am
- Country: UK
- Suzuki 2-Strokes: T500R, SV1000S, TS125, Seeley T500
- Location: Trowbridge UK
Re: Steering Head tapered roller bearings vs ball bearings?
I replaced the cup'an cone ball bearings with a set of Taper Rollers on my resto T500. I sourced them from Crooks Suzuki and they fitted with no modifications needed.
Cheers Geoff
Cheers Geoff
- johnakay
- I likes them jubblies
- Posts: 2365
- Joined: Wed Oct 15, 2008 11:19 am
- Country: UK
- Suzuki 2-Strokes: bike
Re: Steering Head tapered roller bearings vs ball bearings?
well thats good Geoff. I had to emery cloth mine to fit.
If I wanted to make a life-long career out of
working with the mentally retarded I would
have opened a Harley Davidson Dealership
working with the mentally retarded I would
have opened a Harley Davidson Dealership
-
- Expert racer
- Posts: 1087
- Joined: Tue Dec 16, 2008 11:37 am
- Country: UK
- Suzuki 2-Strokes: T500R, SV1000S, TS125, Seeley T500
- Location: Trowbridge UK
Re: Steering Head tapered roller bearings vs ball bearings?
I probably have a bigger hammer, Johnjohnakay wrote:well thats good Geoff. I had to emery cloth mine to fit.
![Very Happy :D](./images/smilies/icon_biggrin.gif)