How do I remove the ignition key cylinder from the gauge?

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
pgb123
Around the block
Posts: 99
Joined: Fri Nov 30, 2012 8:27 am
Country: USA
Suzuki 2-Strokes: GT550

How do I remove the ignition key cylinder from the gauge?

Post by pgb123 »

As you can see, there’s a rubber boot on the back. I don’t want to damage anything. Can’t seem to find the answer by search.

Thanks in advance.
You do not have the required permissions to view the files attached to this post.
Top
sportston
Expert racer
Posts: 1155
Joined: Wed Jul 10, 2013 12:04 pm
Country: England, UK
Suzuki 2-Strokes: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S

Re: How do I remove the ignition key cylinder from the gauge

Post by sportston »

1. Remove key from lock.
2. Unscrew ring beneath key using rubber ended pliers
3. Lock falls out of gauge casing.
Top
User avatar
dorT500
To the on ramp
Posts: 253
Joined: Mon Jun 12, 2017 12:01 pm
Country: USA
Suzuki 2-Strokes: '75 T500M since '93 Ridden it over 100,000 mi
Location: Galveston County, Tx.

Re: How do I remove the ignition key cylinder from the gauge

Post by dorT500 »

Image
_____________
______________________
_______________________________
GONE.......WITH A PUFF OF SMOKE AND A BLUR OF SPOKE
Top
pgb123
Around the block
Posts: 99
Joined: Fri Nov 30, 2012 8:27 am
Country: USA
Suzuki 2-Strokes: GT550

Re: How do I remove the ignition key cylinder from the gauge

Post by pgb123 »

Oh. Thanks.
Top
Post Reply

Return to “Suzuki Two-Strokes (Street)”