+1 on that. You may have switched around the carbs.
The early GT750s with VM have 2 right & 1 left carb. A right carb is used in the middle.
For the original locations, look at the carb part # stamped on the flat surface near the choke. It ends with “L”, “M”, or “R”. The middle & right carbs had slightly different jetting so the part #s are different.
VM Carbs on 76 Buffalo?
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
jabcb
- Moto GP
- Posts: 4311
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: VM Carbs on 76 Buffalo?
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
-
tz375
- Moto GP
- Posts: 6210
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: VM Carbs on 76 Buffalo?
On the stock BS40 carbs the mixture screw for the right carb is on the right side of the carb.
