Gt500 master cylinder

[Tylek17]

I need to rebuild my master cylinder. I have fluid leaking from the base of the cup and at the handle. I have found this ebay rebuild kit, but I can not find anything on the fiche that looks like these parts. So my question is this what I need to buy.

http://cgi.ebay.com/ebaymotors/ws/eBayI ... _750wt_854

Thanks

Tyler

[oldjapanesebikes]

There were two different master cylinders used on the GT500 - the kit you've flagged is for the Nissin, and the full part number is 59600-45821. It is still available from Suzuki for about $31 in USD. The other type is by ASCO, and the kit is 59600-33810. This is also still available from Suzuki for about $33 in USD. I'm not sure what fiche list you are looking at, but I normally use the ones available here, as some of the others do not show the discontinued part numbers.

Hope that helps.

[Coyote]

If it's leaking from the cup base, you may just need to replace the o-ring. Part numbers are 59686-33620 or 59686-33600 depending on the brand of cylinder.
Go here and look up your bike. You can determine which on you have from the pics.
http://www.alpha-sports.com/suzuki_parts.htm" onclick="window.open(this.href);return false;

[drøn]

how do I tell if I have Nissin or Asco?