Page 1 of 1
Two 77 Buffalos
Posted: Wed Jan 28, 2009 6:44 pm
by Suzsmokeyallan
Look at the bike nearest to the camera,, bassani chambers!!!!
http://cgi.ebay.com/ebaymotors/Suzuki-T ... otorcycles
Posted: Wed Jan 28, 2009 8:44 pm
by Arne
Excellent, thanks Allan.
Posted: Wed Jan 28, 2009 8:54 pm
by Suzsmokeyallan
Arne if you buy one or both of these bikes i am interested in the brown faced gauges, the tank badges, the side cover badges and the tank lock and cover...as ive got to place my order you know.
I'm still waiting on the kickstarter verdict when you get a chance...
Posted: Wed Jan 28, 2009 10:09 pm
by rngdng
Not only Bassani pipes, but slide-valve carbs also; can't tell what size.
Lane
Posted: Wed Jan 28, 2009 10:42 pm
by Arne
Arne if you buy one or both of these bikes
Actually just looking at the Bassani pipes for the GT750 expansion chamber post in the Tuning section of this board.... I won't be buying any bikes for a bit as I'm up to my eyeballs again.
i am interested in the brown faced gauges, the tank badges, the side cover badges and the tank lock and cover...as ive got to place my order you know.
I'm still waiting on the kickstarter verdict when you get a chance...
I'm in the midst of pulling parts off that 75 right now, but will have room cleared to pull out the old stashes soon and will let you know (this weekend)
Thanks, Arne
Posted: Wed Jan 28, 2009 10:50 pm
by Suzsmokeyallan
Keep me posted of impending stash perusal Arne, im waiting...
Good observation on the carbs Lane, it looks like a Titan choke assy linkage setup you have on your blue bike, but those are not Titan carbs, the bowls are too deep.
I see a flat and wide aluminum box above the carbs with a hose coming down from it, i wonder what that is??? seems the owner was using premix as theres no cable setup to the oil pump...at least not in the pic anyways..
Posted: Wed Jan 28, 2009 11:07 pm
by Arne
Suzsmokeyallan wrote: im waiting...
Are you putting one together now?
Posted: Wed Jan 28, 2009 11:39 pm
by Suzsmokeyallan
Ha Ha i'm still gathering parts for the various Buffalos i have,, and other projects in the dark corners of my mind.