Two 77 Buffalos

Post by **Suzsmokeyallan** » Wed Jan 28, 2009 6:44 pm

Look at the bike nearest to the camera,, bassani chambers!!!!

http://cgi.ebay.com/ebaymotors/Suzuki-T ... otorcycles

Arne · Post by **Arne** » Wed Jan 28, 2009 8:44 pm

Excellent, thanks Allan.

Post by **Suzsmokeyallan** » Wed Jan 28, 2009 8:54 pm

Arne if you buy one or both of these bikes i am interested in the brown faced gauges, the tank badges, the side cover badges and the tank lock and cover...as ive got to place my order you know.
I'm still waiting on the kickstarter verdict when you get a chance...

rngdng · Post by **rngdng** » Wed Jan 28, 2009 10:09 pm

Not only Bassani pipes, but slide-valve carbs also; can't tell what size.

Lane

Arne · Post by **Arne** » Wed Jan 28, 2009 10:42 pm

Arne if you buy one or both of these bikes

Actually just looking at the Bassani pipes for the GT750 expansion chamber post in the Tuning section of this board.... I won't be buying any bikes for a bit as I'm up to my eyeballs again.

i am interested in the brown faced gauges, the tank badges, the side cover badges and the tank lock and cover...as ive got to place my order you know.
I'm still waiting on the kickstarter verdict when you get a chance...

I'm in the midst of pulling parts off that 75 right now, but will have room cleared to pull out the old stashes soon and will let you know (this weekend)

Thanks, Arne

Post by **Suzsmokeyallan** » Wed Jan 28, 2009 10:50 pm

Keep me posted of impending stash perusal Arne, im waiting...
Good observation on the carbs Lane, it looks like a Titan choke assy linkage setup you have on your blue bike, but those are not Titan carbs, the bowls are too deep.
I see a flat and wide aluminum box above the carbs with a hose coming down from it, i wonder what that is??? seems the owner was using premix as theres no cable setup to the oil pump...at least not in the pic anyways..

Arne · Post by **Arne** » Wed Jan 28, 2009 11:07 pm

Suzsmokeyallan wrote: im waiting...

Are you putting one together now?

Post by **Suzsmokeyallan** » Wed Jan 28, 2009 11:39 pm

Ha Ha i'm still gathering parts for the various Buffalos i have,, and other projects in the dark corners of my mind.