1978 GS1000....ready to ride again

Other makes and motorcycles of interest.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

User avatar
busa1300
To the on ramp
Posts: 352
Joined: Wed Apr 11, 2012 7:17 pm
Country: USA
Suzuki 2-Strokes: RGV RGV RGV RGV ......
Location: Northern Indiana

1978 GS1000....ready to ride again

Post by busa1300 »

Ready to ride again after 25 years in the desert and 2 years in the garage...
You do not have the required permissions to view the files attached to this post.
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
User avatar
Jimroid
To the on ramp
Posts: 309
Joined: Sun Feb 21, 2016 8:32 pm
Country: USA
Suzuki 2-Strokes: GT500 T500 GT750
Location: Pisgah Forest, N.C. USA

Re: 1978 GS1000....ready to ride again

Post by Jimroid »

One of my old favorites right there.
User avatar
busa1300
To the on ramp
Posts: 352
Joined: Wed Apr 11, 2012 7:17 pm
Country: USA
Suzuki 2-Strokes: RGV RGV RGV RGV ......
Location: Northern Indiana

Re: 1978 GS1000....ready to ride again

Post by busa1300 »

Mine too...had my first one back in 82...it was my first open class hell raiser.

This is what it looked like after I pulled the Vetter off, and had started collecting parts for it...

Image

Full nut and bolt (literally) rebuild/restore/restomod...
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
User avatar
Jimroid
To the on ramp
Posts: 309
Joined: Sun Feb 21, 2016 8:32 pm
Country: USA
Suzuki 2-Strokes: GT500 T500 GT750
Location: Pisgah Forest, N.C. USA

Re: 1978 GS1000....ready to ride again

Post by Jimroid »

Nothing an afternoon wrench session couldn't fix!! 18" at both ends? What width? Nice work.
Warehouse1001

Re: 1978 GS1000....ready to ride again

Post by Warehouse1001 »

I like it! Nice work! Chuck
Zunspec4
Expert racer
Posts: 1087
Joined: Tue Dec 16, 2008 11:37 am
Country: UK
Suzuki 2-Strokes: T500R, SV1000S, TS125, Seeley T500
Location: Trowbridge UK

Re: 1978 GS1000....ready to ride again

Post by Zunspec4 »

Wow, a restoration to be proud of. A lovely looking machine :up:

Cheers Geoff
User avatar
busa1300
To the on ramp
Posts: 352
Joined: Wed Apr 11, 2012 7:17 pm
Country: USA
Suzuki 2-Strokes: RGV RGV RGV RGV ......
Location: Northern Indiana

Re: 1978 GS1000....ready to ride again

Post by busa1300 »

Thanks guys....took a lot more out of me than I planned....
I know most do...but this one was torture at times...

Wheels...18x3.5 and 18x2.75 Sun rims
150x70x18 and 110x80x18 tires...
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
rngdng
AMA Superbike
Posts: 1769
Joined: Tue Oct 14, 2008 6:47 pm
Location: Blythewood, SC, USA

Re: 1978 GS1000....ready to ride again

Post by rngdng »

Really nice. :up: :up: :up: :up:



Lane
If you stroke it more than twice; you're playing with it.

Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
User avatar
Evans Ward
To the on ramp
Posts: 326
Joined: Mon Oct 24, 2016 12:35 pm
Country: USA
Suzuki 2-Strokes: 76 GT750, 72 H2 750, 84 RZ350
Location: Macon, GA. USA

Re: 1978 GS1000....ready to ride again

Post by Evans Ward »

Round headlight looks better than square one. I had a 1982 GS1100E bought new with the matching Bell helmet. You always do such nice work!
1976 Suzuki GT750 (Maui Blue), 1972 Kawasaki H2 750 Mach IV (Candytone Blue), 1984 Yamaha RZ350 (KRR- Yellow/ Black).
User avatar
busa1300
To the on ramp
Posts: 352
Joined: Wed Apr 11, 2012 7:17 pm
Country: USA
Suzuki 2-Strokes: RGV RGV RGV RGV ......
Location: Northern Indiana

Re: 1978 GS1000....ready to ride again

Post by busa1300 »

Thanks guys. Speaking of round headlight....this one still needs a new ring, as the one I have is pretty rough.

Image

Image

Image

Image

Image

Now that this is basically done....It will be two stroke time next :mrgreen:
First, to do a sympathetic restoration to my VJ23.....Then....YES.....My GT750 Café Project, ...finally :up:
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
User avatar
jabcb
Moto GP
Posts: 4240
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: 1978 GS1000....ready to ride again

Post by jabcb »

Congrats on a job well done. :up:
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
User avatar
Alan H
Moto GP
Posts: 3160
Joined: Thu Feb 16, 2012 11:50 am
Country: England
Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
Location: The Republic of South Yorkshire

Re: 1978 GS1000....ready to ride again

Post by Alan H »

I notice you went downsize on the rear sprocket somewhat!!
Nice resto.
Think of how stupid the average person is, then realise that half of them are more stupid than that.
User avatar
tz375
Moto GP
Posts: 6204
Joined: Mon Nov 03, 2008 10:47 am
Location: Illinois

Re: 1978 GS1000....ready to ride again

Post by tz375 »

Beautiful job. Did you vapor blast the engine castings or paint them?

And what are the disk rotors? They look good.
User avatar
busa1300
To the on ramp
Posts: 352
Joined: Wed Apr 11, 2012 7:17 pm
Country: USA
Suzuki 2-Strokes: RGV RGV RGV RGV ......
Location: Northern Indiana

Re: 1978 GS1000....ready to ride again

Post by busa1300 »

Thanks guys...
The rear wheel originally had been used on a dragbike, so the sprocket was unusable for the street....at least for the way I planned on riding :)
I soda blasted the engine and re sprayed the upper half silver, and left the bottom casting bare like original. Not many vapor blasters around, compared to the UK....I checked into buying one, but I just don't do enough to make it worthwhile for the cost of equipment. And too lazy to do it on the side to make money to pay it off :(

The rotors are off a GS1150E
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
dgoodsy
On the main road
Posts: 119
Joined: Wed May 11, 2016 9:44 am
Country: Canada
Suzuki 2-Strokes: '72 gt750
Location: Saskatchewan

Re: 1978 GS1000....ready to ride again

Post by dgoodsy »

That is a seriously impressive transformation! Did the GS1000s have oil coolers from factory?
'72 GT750
Post Reply