Velocity Stacks

krwalsh · Post by **krwalsh** » Mon Jan 05, 2009 10:59 pm

A pair of aluminum CIR Cycle Velocity Stacks. These were a set of four, originally sold as part number 3170 for a GS-750. They are 44mm ID where they clamp to the carb, about 55mm tall, and about 70mm OD at the open end of the bell. They come with a rubber grommet and wire mesh screen. There is also a foam filter element that is so dry rotted it will almost certainly disintegrate when you open the package. I used the other two on my '75 GT250, so I know they fit those. These are similar to the Sudco velocity stacks that you can't get anymore, but they do not have the step at the carb end to account for the wall thickness of the carb inlet.

I'll take $20 plus reasonable, actual shipping costs. PayPal only.

m in sc · Post by **m in sc** » Tue Jan 06, 2009 9:49 am

pm sent.

krwalsh · Post by **krwalsh** » Tue Jan 06, 2009 11:29 pm

m in sc · Post by **m in sc** » Wed Jan 07, 2009 10:57 am

yup. thanks.

m in sc · Post by **m in sc** » Thu Jan 08, 2009 12:08 pm

got em, those things are great! thanks. and yes, the 'element' just disappeared.

i have some red uni outer material left over... hmmm...

thanks again!

-mark

krwalsh · Post by **krwalsh** » Thu Jan 08, 2009 12:32 pm

Wow, that was fast shipping. I was going to get some UNIs to cover as well. The old K&N cannot possibly be stretched over the mouth to fit, so it looks like UNI is is.

Velocity Stacks

Velocity Stacks

SOLD