Available on Ebay, 6 new Kawasaki 16128-009 check-valve banjo fittings suitable for rebuilding CCI line set on GT triples (twins too?):
https://www.ebay.com/itm/Oil-Injection- ... 3937719430" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
Were purchased for my GT380, no longer needed thanks to lucking out finding a new NOS lineset.
CCI oil injection check valve fittings (6, Kaw)
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the street
- Posts: 14
- Joined: Wed Jun 27, 2018 4:27 pm
- Country: United States
- Suzuki 2-Strokes: GT380 1974
-
- Expert racer
- Posts: 1120
- Joined: Wed Jul 10, 2013 12:04 pm
- Country: England, UK
- Suzuki 2-Strokes: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S
Re: CCI oil injection check valve fittings (6, Kaw)
I got lucky in Thailand too! Met my wife there. She's not very good at oiling my motorcycle but great in other ways.
(for those that don't get this; you have to read the listing on ebay)
(for those that don't get this; you have to read the listing on ebay)
- Alan H
- Moto GP
- Posts: 3172
- Joined: Thu Feb 16, 2012 11:50 am
- Country: England
- Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
- Location: The Republic of South Yorkshire
Re: CCI oil injection check valve fittings (6, Kaw)
Just for information, hopefully people are aware that the two oil systems - CCI and SRIS work in opposite directions so that the banjo valves used on the CCI lines dont work on the SRIS system and are not interchangeable.
And yes I know that it was deleted from late 380s and the SRIS system can be blanked off in any case if there are issues with pipes or valves.
Just something to be aware of.
And yes I know that it was deleted from late 380s and the SRIS system can be blanked off in any case if there are issues with pipes or valves.
Just something to be aware of.
Think of how stupid the average person is, then realise that half of them are more stupid than that.