Page 1 of 1
72 T500 side cover emblem, oil tank side
Posted: Thu Apr 05, 2018 10:57 am
by m in sc
need one of the big gawdy side cover emblems for the RH side of my bike. the left one is OK.
the match to this one (yes this is actually the rust bucket im fixing). rh one was missing when i got the bike
email @
rooskie@comporium.net
thanks!
Re: 72 T500 side cover emblem, oil tank side
Posted: Tue Apr 10, 2018 8:25 am
by m in sc
NEVER MIND, GOING TO DRAW SOME up of my own design and have them 3d printed.
Re: 72 T500 side cover emblem, oil tank side
Posted: Fri Apr 20, 2018 10:05 am
by diamondj
Usually it's the side cover badge that's missing on the '72's and they are like hens teeth to find. I *think* I picked up an oil tank with a '72 badge on it a few years back at Mid-Ohio but I will have to dig through my spares to find out if my memory is lying to me or not! Will let you know in case you change your mind on the stock badges.
Very interested to see what you come up with for a 3-D printed badge. I know shapeways.com can print in aluminum or steel as well as various plastics so you could design something in aluminum and polish it or steel and have it chrome plated.