Page 1 of 1
72-73 TS400 PARTS WANTED
Posted: Mon Oct 10, 2016 6:13 pm
by vintagenduros
Restoring a 73 TS400K. looking for the tail pipe end - part # 14630-32000, Suzuki chrome handlebars from that era. lo rise models. might consider medium rise if nice. must have good chrome and be straight or very close to straight. Rear turn signals and turn signal stays - part # 35659-30600 for the stays. Left or right side mirrors and mirror cushions.
I would be interested in any NOS parts for this bike. let me know what you have.
rkerr46@yahoo.com.
Re: 72-73 TS400 PARTS WANTED
Posted: Wed Nov 02, 2016 9:25 am
by Suzsmokeyallan
Handlebars for the 76 model 400 are still available from Suzuki, repro indicators are also available from sellers on Ebay as oem ones are long gone.
Exhaust end pipe pieces also show up on ebay as well as the sealing rubber adapter and the clamps for it.
You need to check with Suzuki as well as Ebay as your best bet for finding these parts.
Re: 72-73 TS400 PARTS WANTED
Posted: Wed Nov 02, 2016 5:08 pm
by vintagenduros
Suzsmokeyallan wrote:Handlebars for the 76 model 400 are still available from Suzuki, repro indicators are also available from sellers on Ebay as oem ones are long gone.
Exhaust end pipe pieces also show up on ebay as well as the sealing rubber adapter and the clamps for it.
You need to check with Suzuki as well as Ebay as your best bet for finding these parts.
Hi,
thanks for the info. already been thru Suzuki and e-bay and vintage Suzuki sites. Yes i see the handlebars are available for the newer models but they are completely different from the 72-73 models. mine have a very low rise to them. the newer bars are very tall! yes i have seen the new rear turn signals as well. What people are doing is installing the new ones as is without the stems. I have the original stems so i need the shorter correct turn signals. They are very hard to come by. As for the exhaust pipe end i was able to cut it off and weld a exact size tube on it. looks factory with a good weld. still would consider a NOS pipe end if someone has??
I have a NOS rubber seal and all the correct hardware for the pipe end. I just needed the end itself.
I also need a top chain guard ( chrome) i think it fit the TS400 and Ts250. Anyone have a nice one for sale?
thanks