long shot- but I need T500 oil pump lines
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
sbaugz
- To the on ramp
- Posts: 337
- Joined: Fri Jun 19, 2015 5:14 am
- Country: USA
- Suzuki 2-Strokes: T500, S32-2, GT185
long shot- but I need T500 oil pump lines
My oil pump lines from my T500 are cracked where they both come off the oil pump. Anyone have any leads on another set?
-
GTandcbr
- Yeah Man, the Interstate
- Posts: 590
- Joined: Tue Mar 10, 2015 12:35 pm
- Country: WALES
- Suzuki 2-Strokes: suzuki gt 550j
- Location: Wales
Re: long shot- but I need T500 oil pump lines
If all else fails
http://www.ebay.fr/itm/Suzuki-T-500-GT- ... 2ca2500fdb" onclick="window.open(this.href);return false;
(Not cheap though)
http://www.ebay.fr/itm/Suzuki-T-500-GT- ... 2ca2500fdb" onclick="window.open(this.href);return false;
(Not cheap though)
98 carb Blackbird and GT550j
-
joolstacho
- To the on ramp
- Posts: 395
- Joined: Sun Jul 13, 2014 7:55 pm
- Country: Australia
- Suzuki 2-Strokes: AS50, GS500, GT500, ex GSXR750 slabbie
- Location: Greendale Vic, Australia
- Contact:
Re: long shot- but I need T500 oil pump lines
That's just daylight robbery eh? (cynical little prick seller!)
Can only hope something horrible happens to the him/her... bit of Karma maybe.
Surely lads, it cannot be beyond our combined capabilities to sort out specs for replacement lines from commonly available hose stock!?
Jeez all it has to do is allow oil to flow at low pressure!!!!!
What can be THAT hard?
Can only hope something horrible happens to the him/her... bit of Karma maybe.
Surely lads, it cannot be beyond our combined capabilities to sort out specs for replacement lines from commonly available hose stock!?
Jeez all it has to do is allow oil to flow at low pressure!!!!!
What can be THAT hard?
-
rngdng
- AMA Superbike
- Posts: 1769
- Joined: Tue Oct 14, 2008 6:47 pm
- Location: Blythewood, SC, USA
Re: long shot- but I need T500 oil pump lines
I use an epoxy known as "The Plastic Welder" on lots of plastic stuff. It sticks to nearly any type of plastic and seems to be resistant to everything. A nice, neat bead, or glob if you prefer, may hold you until some kind person sells you a set or you come up with something else.
Lane
Lane
If you stroke it more than twice; you're playing with it.
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
-
ChrisK
- On the main road
- Posts: 121
- Joined: Mon Nov 25, 2013 1:16 pm
- Country: Australia
- Suzuki 2-Strokes: T250, GS550, TL1000S, T500 race, GSXR400 race
- Location: Perth, Western Australia
Re: long shot- but I need T500 oil pump lines
If you mean the lines from the pump to the crankcase inputs, I've got a couple of sets here you are welcome to for the cost of the postage from Oz (they are very light so I don't think it would be much). Let me know.
-
sbaugz
- To the on ramp
- Posts: 337
- Joined: Fri Jun 19, 2015 5:14 am
- Country: USA
- Suzuki 2-Strokes: T500, S32-2, GT185
Re: long shot- but I need T500 oil pump lines
ChrisK wrote:If you mean the lines from the pump to the crankcase inputs, I've got a couple of sets here you are welcome to for the cost of the postage from Oz (they are very light so I don't think it would be much). Let me know.
wow, that's awesome. I will take you up on that offer.
PM being sent. Otherwise my e-mail is sbaugz at msn.com
-
Coyote
- Moto GP
- Posts: 3404
- Joined: Tue Oct 21, 2008 2:41 pm
- Country: USA
- Suzuki 2-Strokes: GT550x2, GT750, GS1000
- Location: Tulsa, Oklahoma
Re: long shot- but I need T500 oil pump lines
Now, THAT'S a stroke of luck!
I was born with nothing and still have most of it left.
.
1978 GS1000C
1976 GT550 ongoing money pit.
.
1978 GS1000C
1976 GT550 ongoing money pit.
