Suzuki 2 Strokes

Whole bike, parting out. Some smaller bits in rough shape but usable; engine parts good though.

Titled frame, but will only work for a cafe/custom build, has been de-tabbed. Matching numbers on the engine.

I've also got a t500 rear wheel.

Unused gasket set/kit for t350.

Couple brand new Avon Road Riders as well:
110/80-18
90/90-18

What shape is the T500 rear wheel in?
Is that a flat-bottom headlight that uses a separate bulb?

Yes, and Yes.

Forgot to mention too, I've got a brand new Avon Road rider that fits that wheel.

jabcb,

By "yes", I meant "yes it is in good shape." Sorry, I read a bit too quickly.

...and yes that headlight is the type that requires a large sealed bulb.

I'm in Pennsylvania. Where are you located? (for shipping costs)

I have a project 1972 T350. Has original tires & inspection sticker from the 70's.
I was thinking about keeping it as original as possible.
I could keep the original tires on the wheels if I had a second set of wheels with roadworthy tires.

I have a box of those large sealed bulbs.
Do you have the connector that holds the bulb in the headlight & connects to the wiring harness?

jabcb wrote:I'm in Pennsylvania. Where are you located? (for shipping costs)

I have a project 1972 T350. Has original tires & inspection sticker from the 70's.
I was thinking about keeping it as original as possible.
I could keep the original tires on the wheels if I had a second set of wheels with roadworthy tires.

I have a box of those large sealed bulbs.
Do you have the connector that holds the bulb in the headlight & connects to the wiring harness?

I'm in Minneapolis.

Any interest in those Avon Roadriders then?

I do have the connector, wiring harness... everything. The bike was complete; only parts missing on this are the forks.

i am interested in the top end. what bore is it on. thank you

I'm interested in the headlight assembly.