1971 T350 for sale

[kmil]

Hey guys,
Just thought I'd list my T350 on the board in case someone here might be in the market. It's a 1971 T350 which has been modified with a GT380 front end and mag wheels (GS450 I think) and a front disk brake. I bought the bike to build a lightweight production racer but the right big end rod bearing locked up in only 50 miles. Teach me to trust someone at his word. I got another crank out of a parts bike. I have rebuilt the motor using OEM parts bought from Paul Miller Motorcycles. The crankshaft was checked and rebuilt by Bill Bune Enterprises with new seals. Bill Bune also checked the cylinders, honed and chamfered them. It has new pistons (.5mm over), new rings, new small end bearings, pins and clips and all new gaskets. I had the cylinders and heads glass blasted. The heads are from a Rebel model. The carbs have been cleaned. The frame and engine numbers match. The bike starts and runs really good. Only has about 300 miles on the motor at this time.The bike is located in the north east corner of Tennessee in Jonesborough. I'm asking $2,500 for the bike and all other parts I have collected including the parts bike.

[alanr]

do you have any baffles to sell

[kmil]

Sorry the extra set of exhaust pipes did not have the baffles.