Page 1 of 1
Fancy a V12 Honda CBX???
Posted: Sat May 01, 2010 7:42 am
by Suzsmokeyallan
Posted: Sat May 01, 2010 9:05 am
by oldjapanesebikes
Amazing
Posted: Sat May 01, 2010 9:58 am
by Jughead
Imagine workin on the carbs on that one.
Posted: Sun May 02, 2010 6:37 am
by Arne
That's quite a feat.
If that were me, cylinder #9 wouldn't fire on idle for no apparent reason ; )
Posted: Sun May 02, 2010 6:50 pm
by captainbellybuster
Hi all, a guy turned up at the VJMC Rally a couple of years ago on this....
He's engineered 2 RD350LC engines together. Sounded pretty awesome!!
v12
Posted: Sun May 02, 2010 7:14 pm
by two-stroke-brit
you had me at V12.
But doing the valves would be a never ending task.
Posted: Mon May 03, 2010 4:48 am
by Craig380
It's interesting how he's done the crank, with two conrods side by side on the same big end bearing.
When Allan Millyard made his V12 Kawa from two Z1300s, he had a set of special "Y" rods made that had a secondary big end above the crank.
I bet the cam timing took a bit of head-scratching to work out