Archived Posts

Post by **Admin** » Mon Oct 30, 2006 5:04 am

muzza wrote:100 dollars a night...that would be motel type accommodation....I presume, no good for extended stays.......

Not sure what choices there are for extended stays....have to think about it.........

When are you planning on coming?

Not sure what demand there is for ROVs in Perth.......I imagine there would be demand in the Natural gas industry but that is 1200 kms North of Perth in the Pilbara region.

Hi Muzza,
we were thinking of sometime betwine November 2007 and Mars 2008.
Do you know of any firms that works whit aumation or something?
Maybe i can polish your bikes or something?

or i can dress up whit bikini and be your pitstopp girl,

Post by **Admin** » Mon Oct 30, 2006 5:22 am

Oh yeah, i`ll have two

Post by **Admin** » Mon Oct 30, 2006 5:28 am

I'll take a 2x.

Post by **Admin** » Mon Oct 30, 2006 5:49 am

Put me down for one in double wide body....2x

Post by **Admin** » Mon Oct 30, 2006 6:11 am

I'd love to have a play and see if a GT250 or 380 motor would fit in those cycle parts .... the frame, suspension and brakes look ideal.

Edited to add, isn't Chris Dupen doing something like that with an FZR chassis and a T350 motor in Oz? Here's the baby ....

Post by **Admin** » Mon Oct 30, 2006 7:10 am

Nah, I don't know anything about automation and ROVs or anyone involved in that field...I would be no help at all.

I don't need a pitboard girl either, esecially a Nordic male type one......as my racing days are over (I think).

November to March....hope you like heat because that is our summer and it can get mighty hot here at times, especially Feb-March.

Look forward to seeing you when you are over here.......be a bit different from Norway I reckon.....as I was saying Summer can be very hot and dry.......not very green then, though the beaches are good, but you have to watch the sun, get sunburnt very quickly! Especially children.

Post by **Admin** » Mon Oct 30, 2006 7:52 am

rngdng wrote:
This might be a good thing to try that low-temp aluminum welding on!! Hmmmmmmm.

Lane

Wow Lane! Is that the same bike we pulled out of the weeds????

I have some low-temp aluminum rod that I am going to use to weld my reed boxes onto my crankcase upper (while pre-heating on the turkey cooker )

I have those electrical doo-dads to send you...Need a couple sticks of the aluminum weld rod to try? They are not the ones you need the stainless brush for...these are better... Knock off the dirt and go to town...

Tom

Post by **Admin** » Mon Oct 30, 2006 8:50 am

Rat Fink Lives

Jug I am up for a xl.

Post by **Admin** » Mon Oct 30, 2006 9:24 am

Hi Wayne... We do stop for one week a year.. Its during Hurricane season.. But if it happens to miss us, then no, we don't have to quit.. The fun of living in a 13 month riding season... This is what makes it hard for me to work on the bike..

Allen......non recovering rideaholic

PS.. someone wanna fix the ailing buffalo?

Post by **Admin** » Mon Oct 30, 2006 10:15 am

Jug,

I'll take two in XL particularly if you do them in black or navy blue with yellow, "ghoul" green, or red artwork!

Jim

Post by **Admin** » Mon Oct 30, 2006 11:04 am

I'd be in for one, two of them if you print them on a black or gray shirt.

Post by **Admin** » Mon Oct 30, 2006 11:38 am

Hey, are these good gasket kits? Anyone use them before?

THanks,
Ron

Post by **Admin** » Mon Oct 30, 2006 2:02 pm

I have used it for my T500 and also a XS 650
I have had no fitment issues with it.
Seems to be pretty complete as fas as i am concerned

Post by **Admin** » Mon Oct 30, 2006 2:05 pm

I will take 2 of them in Large gray and white
unless of course they are like $50 each. Then forget about it

Post by **Admin** » Mon Oct 30, 2006 2:16 pm

Is there a standard water hose that can work to replace the stock one?

Thanks,
Ron

Archived Posts

Re: well....

well....

Athena gasket kits

hose replacements