thieving git on the versys forum

[johnakay]

I sent a rack to a guy on the versys forum to try out to make sure it fit and look OK at my expense etc.
its been 3 weeks now no response to my emails.
I've even mention it on the forum and met with little response even from the members.
this is the 1st time that any one has done this to me
so I said that this doesn't you guys in a good light does it with little or no response to this scenario.
it appears to me that some of you may condoned his actions by not saying any thing.

if only I could get my hands on that thief.grrrrrrrrr
even mention that the ads men should get involve being that this is stealing from another member.
anyway we'll see what the out come is.

[H2RICK]

Maybe contact the board admin folks and see if you can track him down through the info he gave when he signed up on the board ??
My .02 worth....

[johnakay]

I've got his address etc but not worth traveling down to re-arrange his nose.
truthfully there is nothing that I can do.
I'll just have to make another one.
I've still got the jig in which to make one and still got the original one that I made. the one that he has was easier to make and neater but made from 16mm tubing were as I was going to use 19mm tubing on the final rack.
I just wanted to see if it looks ok on the bike before I go into production. john

[TLRam1]

You have a link to the thread Johnny?

[johnakay]

got my rack back now.
he claimed he sent an email to himself instead of me to cut the story short.
so all is fine now.

[Fritz500]

got my rack back now.
he claimed he sent an email to himself instead of me to cut the story short.
so all is fine now.

I sometimes send emails to myself. Especially if it contains stuff I'm interested in. That way I know what I'm getting.